Home / Cross-reference
Replacement & cross-reference guide
Search by the part number you already have. Pin-to-pin means the package, footprint and pinout match and the board does not change. Functional means the optical performance matches but the mechanical interface must be confirmed against your drawing.
| LumeLiDAR part | Our specification | Replaces | Match type | Application |
|---|---|---|---|---|
| PLD905-25W-M | 25 W · 3 stripes · 70 × 10 µm | ROHM RLD90QZW5 | Functional | Robot vacuum obstacle avoidance, rangefinding |
| PLD905-75W-M | 75 W · 3 stripes · 200 × 10 µm | ROHM RLD90QZW3 | Functional | LiDAR, rangefinding |
| PLD905-70W-M | 70 W · 4 stripes · 90 × 18 µm | ams OSRAM SPLTL90AT03 | Functional | LiDAR, rangefinding, engraving |
| PLD905-100W-M | 100 W · 3 stripes · 230 × 10 µm | ams OSRAM SPLUL90AT08 | Functional | LiDAR, long-range rangefinding |
| PLD905-100W-M | 100 W · 3 stripes · 230 × 10 µm | LASER COMPONENTS 905D1S3J09UA | Functional | LiDAR, long-range rangefinding |
| PLD905-25W-P | 25 W · plastic · 70 × 10 µm | ams OSRAM SPLPL90 | Functional | Handheld rangefinders |
| PLD905-75W-P | 75 W · plastic · silver lead frame | ams OSRAM SPLPL90_3 | Pin-to-pin (field proven) | Handheld rangefinders, in-vehicle detection |
| PLD850-1W-MV | 850 nm VCSEL · 201 emitters · 1 W | Lumentum / ams OSRAM 850 nm VCSEL | Functional | IR illumination, 3D sensing |
| PLD940-3W-MV | 940 nm VCSEL · 624 emitters · 3 W | Lumentum / ams OSRAM 940 nm VCSEL | Functional | IR illumination, consumer 3D sensing |
| PLD1550-30W-MCL | 1550 nm · 30 W · collimated | Lumibird / LASER COMPONENTS 1550 nm pulsed LD | Functional | Eye-safe rangefinding |
| LZ1535 erbium-glass series | 1535 nm · 100 µJ – 1 mJ · TEM00 | Coherent / IPG erbium-glass lasers | Functional | Rangefinding, target designation |
| TO46-905APD-230-1 | 905 nm APD · 230 µm active area | Hamamatsu / First Sensor 905 nm APD | Functional | LiDAR receive path |
| LCC-APD-1550-200 | 1550 nm InGaAs APD · 200 µm | LASER COMPONENTS InGaAs APD | Functional | 1550 nm receive path |
| 1653.7 nm DFB + PD500L-1653 | Methane TDLAS source + detector | NTT Electronics / Gooch & Housego / Eblana | Functional | Methane detection |
No match found. Send us the part number directly — a large part of what we supply is quoted against customer drawings rather than a published catalogue.
Spectra and thresholds are matched on published datasheet values. Final confirmation always against a sample measured on your own test bench.
The third-party part numbers and brand names listed in the table above are quoted solely to identify the device a customer may already be using. ROHM, ams OSRAM, OSRAM, Lumentum, Hamamatsu, Coherent, Excelitas and all other marks named on this page are the property of their respective owners. Their use here is descriptive and does not imply any affiliation with, authorisation by, sponsorship by or endorsement from those owners. LumeLiDAR supplies its own parts; it does not supply, repackage or pass off original parts of these manufacturers.
How we treat a replacement claim
- You send the incumbent part number and, if you have it, the mechanical drawing and current drive conditions.
- We map it to the nearest LumeLiDAR device and state plainly whether the swap is pin-to-pin, functional or impossible.
- We ship samples — usually two to five units — so you can measure spectrum, peak power and rise time on your own bench.
- We quote in production volume once your engineering sign-off is in place, and hold the agreed lead time.
What "functional replacement" really means
A functional replacement meets the optical and electrical specification but not necessarily the mechanical one. In practice that means one or more of these differences:
- A different can height or flange diameter
- A different number of pins, or a different pin circle
- A different emitting-area geometry — which changes the far-field, not the power
- A different lead-frame material, which changes the soldering profile
We will say which of these applies to your part before you order, not after.
Send us the part number you are replacing.
Include the annual quantity and the application. We will return a cross-reference position, a price and a sample offer.